11
2022
-
10
How does a computer connect to a TV and HDMI cable?
The HDMI HDL interface provides up to 5Gbps of data transmission bandwidth and can transmit uncompressed audio signals and high resolution video signals. At the same time, no digital-to-analog or analog-to-digital conversion is required prior to signal transmission, ensuring the highest quality audiovisual signal transmission. How does the computer connect the TV to the HD cable?
First, you'll need a TV that supports HDMI HD display cable input and a computer with a graphics card and HDMI HD display cable output. If your computer does not have HDMI HD display cable output, you can also use DVI output, but you will need a DVI to HDMI HD display cable adapter.
Then we need an appropriate length of HDMI HD display cable. It is recommended not to use HDMI HDL longer than 10 meters. Beyond 10m, it is difficult to guarantee that pure HDMI HD display cables (without special circuit enhancements) will continue to support the high resolution of 1920x1080.
And finally, connection. Simply plug one end of the HDMI HD display cable into the HDMI HD display cable of your computer's graphics card for output, and plug the HDMI HD display cable of your TV into the other end. Turn on the computer and the LCD TV, and adjust the signal source of the LCD TV to HDMI HD display cable mode with the remote control. After switching to an HDMI cable, the TV will display the images transmitted from the computer, and the computer's sound and images can be displayed on the TV.
If you can't display your TV picture because of a resolution mismatch, you can set the resolution of your picture on your computer to get the best display on your TV. Right - click the pop-up menu on your computer desktop and click "Show Settings". Click Advanced Display Settings on the right.
In the resolution Settings option, set the monitor to TV. The computer then automatically detects and recommends the best resolution, which can be adjusted to match the actual TV display.
Next, set your TV as your computer's default speaker to sync images and sound. Locate the speaker-shaped volume icon in the computer taskbar, right-click it, and click Play Device.
In the Play Settings, select the TV FTV, right-click and select Set as Default Device. Click OK, and the TV can be used as a computer speaker.
This way, the computer's images and sounds can be successfully connected to the TV, and you can then play the video on the computer to test the effects.
Focusing on the research and development, manufacturing, and sales of wire products
Technical wire and cable manufacturer
CONTACT
Address: No.27 Dakeng Road, Juqi Community, Humen Town, Dongguan City, Guangdong Province
TEL：18128567221
TEL：0769-85557133
FAX：0769-81511628
E-MAIL：macke-ou@foxmail.com
Copyright © 2022 Dongguan Zhengwei Wire and Cable Co., Ltd All Right Server SEO
粤ICP备2022126069号 Prowered by 300.cn